packet tracer E3.2.6.1.3

ga via PC 1 naar de switch
door te klikken op terminal
laat alle instellingen zo staan

Switch:
Switch>en
Switch# conf t
Switch(config)#int fa0/1
Switch(config-if)#switchport mode acces
Switch(config-if)#switchport acces vlan 99
Switch(config-if)#int vlan 99
Switch(config-if)# ip address 172.17.99.11 255.255.255.0
Switch(config-if)#no shut
Switch(config-if)#exit
Switch(config)#hostname S1
S1(config)#line con 0
S1(config-line)#history size 50
S1(config-line)#password cisco
S1(config-line)#login
S1(config-line)#line vty 0 4
S1(config-line)#history size 50
S1(config-line)#password cisco
S1(config-line)#login
S1(config-line)#exit
S1(config)#enable secret class
S1(config)#service password-encryption
S1(config)#exit
S1(config)#int fa0/18
S1(config-if)#duplex full
S1(config-if)# switchport port-security
S1(config-if)# switchport port-security max 1
S1(config-if)# switchport port-security mac-address sticky
S1(config-if)# switchport port-security violation shutdown
S1(config-if)#int fa0/2
S1(config-if)#shutdown
S1(config-if)# int fa0/24
S1(config-if)#duplex full
S1(config-if)#int fa0/3
S1(config-if)#shutdown
S1(config-if)#int fa0/4
S1(config-if)#shutdown
S1(config-if)# int giga 1/1
S1(config-if)#shutdown
S1(config-if)#int giga 1/2
S1(config-if)#shutdown
S1(config-if)#exit
S1(config)#ip default-gateway 172.17.99.1
S1(config)#banner motd &Authorized Access Only&
S1(config)#boot system flash:c2960-lanbase-mz.122-25.SEE1.bin
S1(config)#

Router:
Router>en
Router#conf t
Router(config)#hostname R1
R1(config)#enable secret class
R1(config)#service password-encryption
R1(config)#banner motd &Authorized Access Only&
R1(config)# line con 0
R1(config-line)# password cisco
R1(config-line)#login
R1(config-line)#history size 50
R1(config-line)#line vty 0 4
R1(config-line)#password cisco
R1(config-line)#login
R1(config-line)#history size 50
R1(config-line)#exit
R1(config)#exit
R1#copy r s
enter nog een keer
R1#


100%


Update:
R1 startup config  Fix
S1 Flash command Fix
Banner motd fix voor R1 en R2